Universal Mediation Interface

Universal Mediation Interface Solutions - Datakit Migration

Seamless integration of BNS and IP endpoints

Product Overview

Today, corporate BNS and IP networks are often isolated from each other. Important Network Elements on the BNS network are inaccessible to IP endpoints, and important Network Elements on the IP network are inaccessible to BNS endpoints. This segregation of network devices hinders productivity. Corporate network evolution becomes more complex and costly when the current network is not one cohesive unit.

IP-GATE

IP-GATE - Datakit Migration

Transport IP Traffic Over Your BNS-2000/BNS-2000 VCS Network

Product Overview

For locations that have a Lucent Technologies BNS-2000 Family of Products presence and require connection, the IP-GATE can be used to provide an IP extension cord. Plug in the IP-GATE and it will transport IP traffic from one side of a BNS-2000/BNS-2000 VCS network to a matching IP-GATE on the other side of the network.

Security concerns may arise for network service providers when local IP traffic that is mission critical must traverse public IP networks. The IP-GATE will transport existing IP LAN traffic over a secure (BNS-2000, BNS-2000 VCS, HDLC compatible) Wide Area Network to a matching IP-GATE on the other side of the network.

IP Commkit

IP Commkit - Datakit Migration

IP-CommKit simplifies your host-to-network connection with standard interfaces and flexible configuration options, reducing the cost of operations and maintenance.

Product Overview

IP-CommKit allows any computer with a 10Base-T LAN or 100Base-T LAN interface to serve as a CommKit connected host in a BNS-2000 and BNS-2000 VCS (a.k.a. Datakit® II VCS) network. Your application software can be migrated without recompilation.

IP-CommKit gives you access to the latest host technology, protecting your investment in CO LAN and the Lucent Technologies BNS-2000 Family of Products.

DT-7000

IP-CommKit Host Network Interface

Product Overview

Do you want to retire your remaining BNS/Datakit II VCS nodes but are afraid to do so because of connected hosts running legacy applications using CommKit or IP-CommKit? Is there support or source code for your legacy applications? The solution to all these problems is here today: the DT-7000 from Datatek Applications.

DT-4000

DT-4000 - Multi-Access Device Existing in Both BNS and IP Infrastructures Simultaneously

Multi-Access Device Existing in Both BNS and IP Infrastructures Simultaneously

Product Overview

As you transition to a new network infrastructure, how can you gain better control over the many legacy network elements that may be incompatible with this new infrastructure? Application and network redesign, interoperability testing and configuration of new network elements will be interruptive and costly. A part of your solution is built into the DT-4000.

The DT-4000 is a multi-access product that can exist in both a BNS-2000/BNS-2000 VCS infrastructure and an IP infrastructure simultaneously. It allows for an incremental transition from your existing network to an IP-based backbone. Thereafter, the DT-4000 acts independently of your BNS-2000/BNS-2000 VCS network

The DT-4000 approach enables you to have a lower cost and low impact transition as your networks evolve.

DT-2020i

DT-2020i - Datakit Migration

SAM traffic over IP Independent of BNS Networks

Product Overview

The Synchronous Asynchronous Multiplexor (SAM) family of concentrators has been reliable mainstay for many customers of the BNS-2000 Family of products. However, as you plan to transition your backbone network towards one that is IP based, give serious consideration to the DT-2020i Inter-Networking Mediation Interface for SAM Concentrators.

The DT-2020i transforms the embedded base of SAM concentrators into versatile IP-based terminal servers. It connects terminals, modems, and microcomputers to IP-based services on LANs or WANs via existing serial lines, while maintaining all SAM functionality without the need for BNS node equipment.

DT-2020

DT-2020 - Datakit Migration

SAM traffic over IP Independent of BNS Networks

Product Overview

The Synchronous Asynchronous Multiplexor (SAM) family of concentrators has been a reliable mainstay for many customers of the BNS-2000 Family of products. However, as you plan to transition your backbone network towards one that is IP based, give serious consideration to the DT-2020 Inter-Networking Mediation Interface for SAM Concentrators.

The DT-2020 transforms the embedded base of SAM concentrators into versatile IP-based terminal servers. It connects terminals, modems, and microcomputers to IP-based services on LANs or WANs via existing serial lines, while maintaining all SAM functionality without the need for BNS node equipment.

Datatek Applications

Universal Trunk Module

Universal Trunk Module

Send your BNS Traffic over IP, Frame Relay or ATM Networks

Product Overview