Datatek Applications

Datatek's experience in protocol mediation and networking yields an innovative IPv4 to IPv6 migration solution: The IPv4-IPv6 Transformer

Transport asynchronous and synchronous traffic over your IP network

A single port multi-protocol to IP access device

A multi-protocol access device existing in multiple infrastructures simultaneously with a time slot router and an integrated application processor

A multi-protocol access device existing in multiple infrastructures simultaneously with an integrated application processor

A four-port multi-protocol access device existing in multiple infrastructures simultaneously

A High Capacity Network Application Processor that applies customer specific application processing and protocol operations towards managing network connected devices

A Network Application Processor that applies customer specific application processing and protocol operations of network connected devices

A multi-access device existing in multiple infrastructures simultaneously. The NEBS 3+ certified, SNMP enabled, DT-4000 is a multi-access inter-networking device, which can function as part of an IP, ATM or Frame Relay infrastructure

New implementation of BNS CommKit which shares the native IP interface of the host

Seamless integration of BNS and IP endpoints The UMI is both a replacement and enhancement of the LCS60 product. It allows both synchronous and asynchronous endpoints connected to a BNS network to access endpoints on an IP network

Send your BNS Traffic over IP, Frame Relay or ATM Networks. The Universal Trunk is a fully-integrated BNS-2000/BNS-2000 VCS module. It supports interconnection with other BNS-2000/BNS-2000 VCS nodes, remote shelves (MPCs) and all types of SAMs

The DT-7000 is the last piece in the migration product evolution that is needed to allow the completion of the migration from a BNS network to a completely IP network. It performs this function transparently to the host and the endpoints. A node is no longer needed!

Transport IP traffic over a secure wide area network. The NEBS 3 certified, SNMP enabled, IP-GATE is an intelligent gateway allowing IP based traffic from a LAN segment to be transported across a reliable and secure WAN

SAM traffic over IP Independent of BNS Networks. The DT-2020 is a mediation product which allows re-use of a SAM concentrator (up to 64 ports) on an IP infrastructure without any other BNS equipment

SAM traffic over IP independent of BNS networks. The DT-2020i is a mediation product which allows re-use of a SAM concentrator (up to 128 ports) on an IP infrastructure without any BNS equipment

Proactively monitor your equipment environments with this low cost device. The DT-9001 is a cost effective, environmental sense adapter for unattended central offices and equipment vaults. With sixteen, optically isolated (maintains ground fault integrity of the central office) contact sensors, each contact sensor may connect to a different environmental indicator

V.35 / V.11 / RS-422 Interface Adapter. The DT-9008 is an adapter that converts a device’s V.35, V.11, or RS-422 interface to RS-232 for connection to a DT-4000 port or other network port. On one end, the DT-9008 has an industry standard RJ-45 connection that is high speed RS-232 and may operate up to 230Kbps. On the other end, the DT-9008 has an RS-530 DB25 connection that provides V.35, V.11, and RS-422 without any configuration.

Multi-Mode DB25 Panel (MMP)The DT-9116 is a multiple physical layer adapter panel for the DT-(4216, 4232, 4180, 4280) product. It provides sixteen DB25 RS-530 interfaces, which may be configured for a multitude of physical layer protocols.